Serving the Port St. Lucie area  ·  (772) 877-0850  ·  Open Mon-Sat 7am-6pm
📞 (772) 877-0850 Free Quote

Spray Foam Insulation in Wellington, FL (33414) · Local Professionals

Port St. Lucie Spray Foam Insulation · Fast response in Wellington and the Port St. Lucie area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+24Verified Reviews
15Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Wellington's equestrian estates and sprawling subdivisions sit on concrete slab foundations with large, vented attics that bake in the Florida heat for months on end. Built mostly from the 1980s through the early 2000s, these homes route air conditioning ductwork and return air handlers straight through those attics, where temperatures climb well past 130 degrees in summer and humidity never really leaves. Port St. Lucie Spray Foam Insulation has been serving Wellington and the surrounding Port St. Lucie area since 2011, helping homeowners and property managers in 33414 stop the heat leak and the moisture creep that makes air conditioning run all day and never quite cool the rooms farthest from the handler.

Wellington homeowners call us because we know the building stock here, we understand why a room over a garage stays hot no matter what the thermostat says, and we show up with a crew that leaves the property clean and a written estimate that spells out the R-value and thickness you are paying for. No guessing, no rig-and-run crews from out of state, and no promises we cannot keep.

Spray Foam Insulation in Wellington (33414)

Wellington's housing stock is almost entirely single-story concrete block homes on slab foundations, with ductwork and air handlers routed through vented attics. That attic space is where your cooling problem lives. In summer, the attic temperature can exceed 130 degrees while the roof is still wet from afternoon thunderstorms. That moisture-laden outside air gets pulled through every gap at the ceiling plane, every poorly sealed top plate, and every light fixture opening. The damp air condenses on ductwork, insulation gets wet and loses its R-value, and the rooms at the end of those duct runs never reach temperature. Meanwhile, your air conditioning system runs harder and longer, and your electric bill climbs.

Closed cell spray foam seals the attic at the roof deck, stops the air leakage, and creates a thermal and moisture barrier that keeps that hot, humid outside air from entering the conditioned space. Open cell foam is lighter and more cost-effective for many attics where closed cell is not required by code. Wall cavities in older Wellington homes are often empty or poorly filled, especially in retrofit situations where injection foam can be injected between the studs without tearing into drywall. Crawl spaces and rim joists are rare in 33414, but when they do exist, they are sources of cold air infiltration in winter and humidity in summer, and they respond well to foam and air sealing. We have been serving Wellington and the Port St. Lucie area with fully insured crews since 2011, and we know exactly what the local building code requires at your address.

Our services in Wellington

How a Job Works in Wellington

We start with a free on-site assessment. We walk your attic, crawl space, or the wall cavities you want to insulate, measure the area, look at what is already there, and note any moisture, contamination, or damage that has to be addressed before we spray. If the insulation is wet, moldy, or contaminated, it comes out first. We cannot spray over a wet substrate, and we will not. We give you a written estimate with R-value, thickness, the type of foam (open or closed cell), the total square footage or board footage, and a price. No surprises.

On the day of the work, our crew sets up mechanical ventilation to manage the smell during application and cure. We spray the foam to the specified thickness in multiple passes, let it cure, and trim the excess flush with the framing. The attic or wall cavity is then ready for any thermal or ignition barriers that your local building code requires. We coordinate with you about re-entry: most homes can be re-occupied after 24 to 48 hours, but we will give you a clear window based on the size of the job and the ventilation. We clean up all debris and equipment, and we leave your property the way we found it.

Attic spray foam insulation in Wellington typically runs from $1.50 per square foot for open cell foam to $1.20 per board foot for closed cell, depending on the R-value you need, the thickness, and how much existing insulation has to be removed. A typical Wellington attic of 1,200 to 1,500 square feet will range from $1,800 to $3,000 or more if removal is required. Wall and injection foam retrofit typically starts around $2 per square foot, depending on the wall. Crawl space foam starts at $2,500. Rim joist and band joist sealing begins at $650. The biggest cost drivers are the area to cover, the R-value and thickness required by code at your address, whether you need closed cell or open cell, and whether contaminated or wet insulation has to be removed first. We offer free written estimates at (772) 877-0850. Call us to schedule an on-site walk-through in Wellington, and we will give you a firm price based on what we find.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Wellington and nearby areas.

I live in one of Wellington's equestrian estates or a subdivision near Greenacres, and my air conditioning bill has been climbing every summer. What is actually happening in my attic?
Your attic is pulling hot, humid outside air through every gap at the ceiling plane and around the ductwork. In Wellington's climate, that outside air is often 90+ degrees with 70 to 80 percent humidity. When it enters your cool attic, it condenses on the ductwork and insulation, and the moisture creeps down into the walls and living spaces below. Meanwhile, your air conditioning has to work twice as hard to cool ductwork that is baking in 130-degree attic heat. Closed cell spray foam at the roof deck stops that air leakage and creates a barrier that keeps the moisture out. The ductwork stays cooler, your system does not have to run as hard, and the rooms at the end of the duct run finally reach temperature.
I found damp insulation and a musty smell in my Wellington attic. Do I need to remove the old insulation before you spray foam?
Yes. We do not spray foam over wet, damp, or contaminated insulation. If the insulation is wet or moldy, it has to come out first. We inspect the substrate carefully, and if we find moisture, we stop and talk to you about what is causing it. Sometimes it is a roof leak, sometimes it is condensation from air leakage, and sometimes it is both. We fix the moisture first or we walk away. Once the attic is dry and clean, we spray the foam. If you need the old insulation removed, that is a separate line item, usually starting around $950 depending on the area and what is there. Call us at (772) 877-0850 to schedule an inspection.
What does spray foam insulation actually cost for a Wellington attic, and what affects the price?
Attic foam in Wellington typically ranges from $1.50 per square foot for open cell to $1.20 per board foot for closed cell. A 1,200-square-foot attic might run $1,800 to $2,500 for open cell, or $2,500 to $4,000 for closed cell, depending on the R-value required by code at your address and whether old insulation has to be removed first. The biggest cost factors are the total area, the R-value and thickness you need (which the building code sets), whether you choose open or closed cell, and whether removal is necessary. We give free written estimates with all the details spelled out. Call (772) 877-0850 to schedule an on-site assessment in Wellington.
Does Wellington require a permit for spray foam insulation, and who decides what R-value and thickness I need?
Yes, Wellington and Palm Beach County enforce the Florida Building Code. The code specifies the R-value and thickness required for your attic, and it also governs whether you need an ignition barrier, a thermal barrier, or both. The local building department inspects the work. We help you navigate what applies at your specific address, but the building official makes the final call. We do not pull the permit, but we work with whatever the code requires. If you are unsure whether your job needs a permit, call the Wellington building department or ask us when we come out for the free estimate.
I live in a Wellington subdivision with an HOA. Can I spray foam my attic or metal barn without getting approval first?
Attic spray foam insulation is interior work and usually does not require HOA approval. Metal buildings, barndominiums, and exterior work on structures in master-planned communities in Wellington often do. Check your HOA architectural guidelines or call your HOA board before you start. Interior attic work is almost always fine. If you have a detached barn, a metal building, or a garage you want to insulate, ask the HOA first. We can help you understand what you need to do.
Are you fully insured and do you carry workers' compensation coverage for spray foam work in Wellington?
Yes. We are fully insured with general liability and workers' compensation coverage. All of our crews are covered. You can ask to see proof of insurance before we start any work, and we are happy to provide it.
It is the middle of summer in Wellington and my air conditioning is running constantly. Is this the right time to spray foam my attic, or should I wait until fall?
Summer is actually the best time to see the problem clearly. If your cooling bill is high and rooms are not reaching temperature, that is when you feel it most. However, spray foam work requires mechanical ventilation during cure and a 24 to 48 hour re-entry window, so you need to be able to keep your home vacant or minimally occupied for that period. If you are running the AC hard all day, that window is tighter. Fall and winter are easier for scheduling because you do not have to shut down cooling for two days. But call us now at (772) 877-0850 to get a free estimate and a timeline. We can schedule the work for whenever it makes sense for your home.
Why choose us?

Trusted professionals since 2011

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Port St. Lucie

All your work handled by qualified professionals in Port St. Lucie

Attic Spray Foam Insulation

Unvented attic foam for Port St. Lucie's block homes

Included in your service

  • Seals attic heat loss in St. Lucie County block homes
  • Air seals ceiling plane against Treasure Coast humidity
  • Closed cell foam rated for hurricane season humidity swings
  • Built for 1980s-2000s slab homes in Tradition and St. Lucie West
Learn more→

Closed Cell Spray Foam Insulation

Closed cell spray foam built for Port St. Lucie's humid block homes

Included in your service

  • R-value per inch suited to St. Lucie County's climate
  • Vapor retarder facing against Treasure Coast humid air
  • Applied in block wall cavities common across Port St. Lucie
  • Rated for hurricane season moisture exposure
Learn more→

Open Cell Spray Foam Insulation

Open cell foam for interior walls across Port St. Lucie

Included in your service

  • Fills stud cavities in older Fort Pierce and Jensen Beach homes
  • Expands for crack coverage in humid Zone 2A air
  • Sound dampening for rooms near St. Lucie West traffic
  • Applied below roof decks in vented attics over block homes
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for Port St. Lucie's block home cavities

Included in your service

  • Fills concrete block cores in 1980s-2000s Port St. Lucie homes
  • Small access holes drilled through Port St. Lucie stucco
  • No interior disruption in occupied Tradition or Torino homes
  • Cuts heat gain through block walls in Zone 2A summers
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for the rare raised homes near Stuart and Palm City

Included in your service

  • Vapor barrier and foam for the few crawl spaces near Stuart
  • Vent sealing against humid Treasure Coast air intrusion
  • Rim joist foam where block homes meet a raised floor
  • Built for Martin County's older raised-foundation homes
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist foam for raised homes near Stuart and Jensen Beach

Included in your service

  • Closed cell foam at band joists on raised Martin County homes
  • Seals Treasure Coast humid air leaks at the foundation line
  • Fits the rare non-slab homes near Stuart and Palm City
  • Air seals against humidity across the surrounding counties
Learn more→

Garage Spray Foam Insulation

Garage foam to stop summer heat transfer in Port St. Lucie homes

Included in your service

  • Foams shared walls between garage and living space in block homes
  • Cuts attached-garage heat gain in Zone 2A summers
  • Fits workshops and garages across St. Lucie West and Tradition
  • Air seals garage ceilings against Treasure Coast humidity
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam for St. Lucie County barndominiums

Included in your service

  • Stops panel sweat in humid St. Lucie County metal buildings
  • Closed cell foam for barndominiums near Okeechobee and Fort Pierce
  • Cuts interior heat gain under the Treasure Coast sun
  • Fits ag buildings across St. Lucie and surrounding counties
Learn more→

Commercial & New Construction Spray Foam

Commercial spray foam for new builds across St. Lucie County

Included in your service

  • Free estimates for commercial jobs across the surrounding counties
  • Foam applied to roof decks on new slab-built construction
  • Fits small commercial buildings in St. Lucie West and Tradition
  • Sized for the energy code that applies in Port St. Lucie
Learn more→

Insulation Removal

Old insulation removal for Port St. Lucie attics

Included in your service

  • Clears humidity-packed material from St. Lucie County attics
  • Removes old batts from vented attics over block homes
  • Bagged disposal from Tradition, St. Lucie West and Torino homes
  • Preps ceiling plane for Zone 2A unvented foam retrofit
Learn more→

Insulation Replacement & Re-Insulation

Full re-insulation for Port St. Lucie block home attics

Included in your service

  • Removes old batts from St. Lucie County vented attics
  • Sprays fresh foam at the roof deck over block homes
  • Brings ductwork into conditioned space in Tradition and Torino
  • Rebuilds the air barrier against Treasure Coast humidity
Learn more→

Air Sealing

Air sealing for Port St. Lucie's humid block home attics

Included in your service

  • Seals top plates in St. Lucie County block home attics
  • Blower door style checks for Treasure Coast humidity leaks
  • Targets penetrations above Tradition and St. Lucie West ceilings
  • Cuts ACH50 leakage during the long Zone 2A cooling season
Learn more→
Verified client reviews

24+ Verified Client Reviews in Port St. Lucie

⭐⭐⭐⭐⭐ 4.9/5 · 24 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Port St. Lucie · Response within 24h · No commitment · ☎ (772) 877-0850

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Port St. Lucie ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm